ME1000 E-Bike Light - Motor powered only - cable sold separately

MS-ME1000
$124.95 $0.00( / )
Tax included. Shipping calculated at checkout.
THE PIONEER ME 1000 SmartE-BIKE Light 1000 LM | 140 M | IPX 6 | -20°C / 40°C HOW TO USE? LIGHT MODES Mode HIGH MID LOW FLASH DRL LUMENS 1000 500 350 0-350 15 Swept Through The Darkness After years of research and development, ME 1000'sfront lens has been...

THE PIONEER

ME 1000 Smart
E-BIKE Light

1000 LM | 140 M | IPX 6 | -20°C / 40°C

HOW TO USE?


LIGHT MODES

Mode HIGH MID LOW FLASH DRL
LUMENS 1000 500 350 0-350 15
Swept Through The Darkness

Swept Through The Darkness

After years of research and development, ME 1000'sfront lens has been fine-tuned to make the most of its extremely power-efficient LED, the two are perfectly matched to provide a maximum output of 1000lumens, carpeting the entire frontal section with no sharp edge nor hot spots.

Daytime Running Light

Daytime Running Light

During the daytime, the always-on Daytime Running Light significantly enhances the rider's road presence at very little power consumption.

Intelligent Light Sensor

Intelligent Light Sensor

Due to the high output, we have taken the internal heat management system up a notch. Much of the MJ-906S is covered by efficient heat dissipation fins to help with fast cooling.

Design For Safety

Design For Safety

In an effort to maximize the versatile purposes of the ME 1000 we have added side lighting and anti-glare to fully round out ME 1000's active and passive safety features under all weather and road conditions.

6V-12V E-bike Compatible

6V-12V E-bike Compatible

ME 1000 E-bike Light can be hooked up to the light port of your E-bike battery. Can automatically adapt its power to the supply voltage and work with most E-bike systems from 6-12V, like Bosch, Shimano, Brose, and Yamaha.
*Connection cable to e-bike drive unit not included, please purchase separately.

Intelligent Thermal Management

Intelligent Thermal Management

The built-in smart thermal control system and the seamless one-piece aluminum housing keep the ME1000 operating temperature at optimal levels. protecting internal circuits and maintaining maximum output. E-bike Light is covered by efficient heat dissipation fins to help with fast cooling.

Firm As A Rock

Firm As A Rock

With its one-prong aluminum mount, the ME 1000 can be installed on the handlebar without removing grip shifters or brake levers, providing unprecedented stability, though only compatible with 31.8mm ~ 35mm handlebars.

Technical Specifications

Specifications Parameter
Max Lumen 1000 LM
LED Luminus SST-40
Beam Angle 27°
Max Throw 140 m
E-BIKE Compatible 6-12V
DRL Support
Anti-Glare Support
Brightness Sensor Support
Suitable Handlebar Range 31.8mm - 35mm
Beam Intensity 4900 CD
Waterproof Rate IPX6
Weight 92g / 3.24 oz
Dimensions 40*36*36 mm / 1.57*1.41*1.41 in
Material Aluminum
Mounting System One-side holder

E-Bike Lights Compatibility

ME1000 can be powered directly from the light output of the motor, just like our other e-bike lights.
Click the following link to know whether the ME1000 is compatible with your motor or not.

What's in the Box?

ME1000 packing list

ME 1000 E-bike Light x 1
Silicone Pad x 2
3mm hex x 1
User Manual x 1(Manual Download Here)

ME1000 E-Bike Light - Motor powered only - cable sold separately

ME1000 E-Bike Light - Motor powered only - cable sold separately

$124.95 $0.00( / )
Tax included. Shipping calculated at checkout.

Recently Viewed Products